Boat Bedding

Boat Bedding

Boat Bedding

Boat Bedding – A Simple Solution

For most boats, the lack of space to house a set of bunk beds can lead to an uncomfortable situation. To keep a boat looking spiffy and refreshing, a good boat bedding can be vital. สล๊อตเว็บตรงแตกง่าย

The material chosen for the bed has to be moisture resistant and easily cleanable. A low maintenance bedding prevents your boat from picking up sticks and leaves and a high maintenance bed keeps your boat looking good for longer.

Good bedding materials are usually Masonching; this type of bedding has to be cleaned easily with soap and water. Both PVC and Polyester fabric are water resistant and will not Yellow or fade the color of your boat.

Boat Bedding with Polyester Foam

A Polyester bed will not harm your boat’s surfaces. The polyester frames are 100% water resistant, and even dry heat will not make the fiber at all shrink. Polyester is easy and quick to clean, and is also resistant to mild steel. You can also iron aPolyester bed onto your boat, and it is secure and adhered to the top and sides of the boat with marine tape and straps.

Boat Bedding with PVC Foam

A Polyester bed will not harm your boat’s surfaces either, and it is quick and easy to clean. It is a fast drying bedding, and is also a great flooring on a boat. Marine tape is utilized on the PVC beds, for extra support and adhesives to the boat. Once the PVC has dried, you simply shrug it out and it is ready to be washed.

For most low maintenance boats that are less than 14′ long, a Polyester bed should do the job.  When constructing a boat bed using the above materials, your boat can be over 16 feet long.

Heated One Should Last A While – Not Good

Manufacturers advertise the fact that the bed can be heated to over 120°F and, indeed it can be. However, don’t expect this to happen in just any set of weather conditions. When heating a bed, the air is heated and then forced through the tube(s), and not pushed through the molding as the manufacturers claim. A bed can only be heated to about 140°F, and can remain that way during a heavy rain. A damp squall could easily turn the temperature to as high as 200°F, and eventually the surface could reach temperatures over 250°F. If you do manage to get your boat onto the bed, a gentle brushing of the deck and the top surface with a wet rag or sponge could help with absorbing the wetness of the air, but be warned that once the tempos reach these high temperatures their will be no heating from the interior of the boat to withdraw the heat. So once the boat is on the bed, you must guard against water entering the hull or overheating the interior of the boat.

Repairs When Performance Is impaired

Usually a bedding bed’s uneven surface will cause a certain amount of performance problems. If you notice that performance is severely impaired, it may be time to install a new bedding or enhance your boat’s performance with a new bed.

There are a number of products on the market for replacing any type of boat bedding, such as polyester carpet, cotton duck, or synthetic fabrics. Many of them are straightforward replacements of older,model-sized bunk beds. Some of these products will work with older polyester versions of the boat bedding, while others provide only slight expansion.

For the classic boat beds, shrink wrap is the best alternative, because it is durable, waterproof and provides the best performance. Shrink wrap is usually purchased pre-cut in numerous sizes and shapes to fit the boat bed dimensions. Choose the size that almost fits the raft of your boat, but not so small that it makes your boat too tiny.

Brigham Young University, located on Salmon River in Utah, has developed a special Sports Caboose Tubing System that is specifically designed for using polyester-based boat beds. This flexible tube system is manufactured upon the demand of several furniture manufacturers. It is used on a number of boats, most notably the Utah State Bird Watching Trucks.

Conway’s Polytrack Tubing System has been around since 1956 and provides all the advantages of polyester-based bedding with the added advantage of using flexible-silicon fiber for increased longevity for your boat beds. The system is manufactured on the same machines used to make the Athletic Teams’ athletic sand and concrete products. This is the main polyester-based boat bedding system in use at Medina, andchy.com.

 

Boat Bedding

Related Posts